BMW E36 M3 3.2 Front wishbones, Genuine BMW with New Lemforder ball joints PAIR

BMW E36 M3 3.2 Front wishbones, Genuine BMW with New Lemforder ball joints PAIR
BMW E36 M3 3.2 Front wishbones, Genuine BMW with New Lemforder ball joints PAIR
BMW E36 M3 3.2 Front wishbones, Genuine BMW with New Lemforder ball joints PAIR
BMW E36 M3 3.2 Front wishbones, Genuine BMW with New Lemforder ball joints PAIR
BMW E36 M3 3.2 Front wishbones, Genuine BMW with New Lemforder ball joints PAIR
BMW E36 M3 3.2 Front wishbones, Genuine BMW with New Lemforder ball joints PAIR
BMW E36 M3 3.2 Front wishbones, Genuine BMW with New Lemforder ball joints PAIR
BMW E36 M3 3.2 Front wishbones, Genuine BMW with New Lemforder ball joints PAIR
BMW E36 M3 3.2 Front wishbones, Genuine BMW with New Lemforder ball joints PAIR
BMW E36 M3 3.2 Front wishbones, Genuine BMW with New Lemforder ball joints PAIR
BMW E36 M3 3.2 Front wishbones, Genuine BMW with New Lemforder ball joints PAIR
BMW E36 M3 3.2 Front wishbones, Genuine BMW with New Lemforder ball joints PAIR
BMW E36 M3 3.2 Front wishbones, Genuine BMW with New Lemforder ball joints PAIR
BMW E36 M3 3.2 Front wishbones, Genuine BMW with New Lemforder ball joints PAIR

BMW E36 M3 3.2 Front wishbones, Genuine BMW with New Lemforder ball joints PAIR
Welcome to CR ///M-Tech BMW E36 and E46 M3 Parts specialist based in Shrewsbury in the West Midlands. Please be sure to add me to your list of. Sellers to ensure you see the new items that I list and for future inquires. Under NO circumstance will we post any car body panels, bodywork, glass or bumpers so please don’t ask. Please contact me with any questions. 07949 464 954 – Chris. HERE WE HAVE A PAIR (Left + Right) OF GENUINE BMW E36 M3 3.2 WISHBONES THAT HAVE BEEN REMANUFACTURED HERE BY US. These Genuine BMW arms are stronger than any aftermarket part and have solid outer Lemforder ball joints that are what we use on all our race, rally, road and track cars, they have proved to be very good and last, unlike other brands. So the procedure we use is that first we will only used genuine BMW arms that are tidy and straight, we then strip them bare, sand blast them, etch prime them, 2 coats of black paint and 2 coats of lacquer. Next we press in 4 Lemforder O. E ball joints, the outers being the solid smaller 41mm M3 version as fitted by BMW when new. We only used the best ball joints that have been proved for longevity on our competition cars over the past 10 years. Lemforder is the OE supplier of genuine BMW ball joint for the factory cars. The rear P bush then gets the same treatment and on these M3 3.2 versions we fit the solid centered bushing as per factory and these are again specific to the 3.2 only being stronger than non M3 ones. Note – sending parts overseas can often be very expensive if there over 2Kg so please do check 1st. Please note and be aware that some parts may require special tools to fit them, or are to be fitted by qualified personnel only. For some items such as internal engine components, any SMG parts, ECU’s or electrical modules – we will need to see proof that they have been fitted and set up / configured by a BMW main dealers or a well credited specialist before any claim can be made against parts being faulty. Wheels and tyres should only be fitted by a recognized tyre depot or garage, where the fitment of the wheels must be checked to the vehicle they are to be used on. I will take no responsibility in any damage that occurred by incorrectly fitted or incorrect fitment wheels and tyre sizes.
BMW E36 M3 3.2 Front wishbones, Genuine BMW with New Lemforder ball joints PAIR